10.4.1.1 Packet Tracer – Skills Integration Challenge

10.4.1.1 Packet Tracer – Skills Integration Challenge

From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.

Version 5.02Version 5.03Version 6.0Online Assessment
Chapter 10 ExamChapter 10 ExamChapter 10 ExamOnline Test
Next Chapter
Practice FinalPractice FinalPractice FinalOnline Test
Lab Activities
10.1.1.4 Packet Tracer – Map a Network Using CDP
10.2.1.4 Packet Tracer – Configure and Verify NTP
10.2.3.5 Packet Tracer – Configuring Syslog and NTP
10.3.1.8 Packet Tracer – Backing Up Configuration Files
10.3.3.5 Packet Tracer – Using a TFTP Server to Upgrade a Cisco IOS Image
10.4.1.1 Packet Tracer – Skills Integration Challenge

Packet Tracer – Skills Integration Challenge (Answer Version)

Answer Note: Red font color or Gray highlights indicate text that appears in the Answer copy only.

Topology

10.4.1.1 Packet Tracer – Skills Integration Challenge

10.4.1.1 Packet Tracer – Skills Integration Challenge

Addressing Table

Answer Note: The student version has blanks in place of all variables shown in double brackets.

DeviceInterfaceIP AddressSubnet MaskDefault Gateway
[[R1Name]]G0/0.15[[R1G0sub15Add]][[R1G0sub15SM]]N/A
G0/0.30[[R1G0sub30Add]][[R1G0sub30SM]]N/A
G0/0.45[[R1G0sub45Add]][[R1G0sub45SM]]N/A
G0/0.60[[R1G0sub60Add]][[R1G0sub60SM]]N/A
S0/0/0[[R1S000Add]]255.255.255.252N/A
S0/0/1[[R1S001Add]]255.255.255.252N/A
S0/1/0[[R1S010Add]]255.255.255.252N/A
[[R2Name]]G0/0[[R2G00Add]][[R2R3LanSM]]N/A
S0/0/0[[R2S000Add]]255.255.255.252N/A
S0/0/1[[R2S001Add]]255.255.255.252N/A
[[R3Name]]G0/0[[R3G00Add]][[R2R3LanSM]]N/A
S0/0/0[[R3S000Add]]255.255.255.252N/A
S0/0/1[[R3S001Add]]255.255.255.252N/A
[[S1Name]]VLAN 60[[S1VLAN60Add]][[R1G0sub60SM]][[R1G0sub60Add]]
[[PC1Name]]NICDHCP AssignedDHCP AssignedDHCP Assigned

VLANs and Port Assignments Table

VLAN Number – NamePort assignmentNetwork
15 – ServersF0/11 – F0/20[[R1-VLANsrvNet]]
30 – PCsF0/1 – F0/10[[R1-VLANpcNet]]
45 – NativeG0/1[[R1-VLANntvNet]]
60 – ManagementVLAN 60[[R1-VLANmanNet]]

Scenario

This culminating activity includes many of the skills that you have acquired during this course. First, you will complete the documentation for the network. So make sure you have a printed version of the instructions. During implementation, you will configure VLANs, trunking, port security and SSH remote access on a switch. Then, you will implement inter-VLAN routing, DHCP, RIPv2, default routing, and NAT on a router. Finally, you will use your documentation to verify your implementation by testing end-to-end connectivity.

Documentation

You are required to fully document the network. You will need a print out of this instruction set, which will include an unlabeled topology diagram:

  • Label all the device names, network addresses and other important information that Packet Tracer generated.
  • Complete the Addressing Table and VLANs and Port Assignments Table.
  • Fill in any blanks in the Implementation and Verification steps. The information is supplied when you launch the Packet Tracer activity.

Implementation

Note: All devices in the topology except [[R1Name]], [[S1Name]], and [[PC1Name]] are fully configured. You do not have access to the other routers. You can access all the servers and PCs for testing purposes.

Implement to following requirements using your documentation:

[[S1Name]]

  • Configure remote management access including IP addressing and SSH:
    • Domain is cisco.com
    • User [[UserText]] with password [[UserPass]]
    • Crypto key length of 1024
    • SSH version 2, limited to 2 authentication attempts and a 60 second timeout
    • Clear text passwords should be encrypted.
  • Configure, name and assign VLANs. Ports should be manually configured as access ports.
  • Configure trunking.
  • Implement port security:
    • On F0/1, allow 2 MAC addresses that are automatically added to the configuration file when detected. The port should not be disabled, but a syslog message should be captured if a violation occurs.
    • Disable all other unused ports.
  • Configure VTY lines to be accessible via SSH only

[[R1Name]]

  • Configure inter-VLAN routing.
  • Configure DHCP services for VLAN 30. Use LAN as the case-sensitive name for the pool.
  • Implement routing:
    • Use RIP version 2
    • Disable automatic summarization
    • Configure one network statement for the entire [[DisplayNet]] address space
    • Configure a default route to the Internet.
  • Implement NAT:
    • Configure a standard, one statement ACL number 1. All IP addresses belonging to the [[DisplayNet]] address space are allowed.
    • Refer to your documentation and configure static NAT for the File Server.
    • Configure dynamic NAT with PAT using a pool name of your choice, a /30 mask, and these two public addresses:
        • [[NATPoolText]]
    • Bind the NAT pool to ACL 1 and configure PAT. Packet Tracer does not grade this command.
    • Activate NAT on all appropriate interfaces.

[[PC1Name]]

  • Verify [[PC1Name]] has received full addressing information from [[R1Name]].

Verification

All devices should now be able to ping all other devices. If not, troubleshoot your configurations to isolate and solve problems. A few tests include:

  • Verify remote access to [[S1Name]] by using SSH from a PC.
  • Verify VLANs are assigned to appropriate ports and port security is in force.
  • Verify OSPF neighbors and a complete routing table.
  • Verify NAT translations and statics.
    • Outside Host should be able to access File Server at the public address.
    • Inside PCs should be able to access Web Server.

Suggested Scoring Rubric

Packet Tracer scores 70 points. Documentation is worth 30 points.

ID:[[indexAdds]][[indexNames]]

*****************************************************

ISOMORPH ID KEY:

ID = XY where;

X = indexAdds for /24 private address space

Y = indexNAMES for device names

Note: Each seed contains variables that are independent

of the other seeds. You do not need to test all the

various combinations.

=======================================================
ISOMORPH ID = 00
=======================================================

!HQ!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
en
conf t
ip dhcp pool LAN
network 172.16.15.32 255.255.255.224
default-router 172.16.15.33
interface GigabitEthernet0/0
no shutdown
interface GigabitEthernet0/0.15
encapsulation dot1Q 15
ip address 172.16.15.17 255.255.255.240
ip nat inside
interface GigabitEthernet0/0.30
encapsulation dot1Q 30
ip address 172.16.15.33 255.255.255.224
ip nat inside
interface GigabitEthernet0/0.45
encapsulation dot1Q 45 native
ip address 172.16.15.1 255.255.255.248
interface GigabitEthernet0/0.60
encapsulation dot1Q 60
ip address 172.16.15.9 255.255.255.248
router rip
version 2
no auto-summary
network 172.16.0.0
!
ip nat pool TEST 209.165.200.225 209.165.200.226 netmask 255.255.255.252
ip nat inside source list 1 pool TEST overload
ip nat inside source static 172.16.15.18 209.165.200.227
ip route 0.0.0.0 0.0.0.0 Serial0/1/0
access-list 1 permit 172.16.0.0 0.0.255.255
interface s0/0/0
ip nat inside
interface s0/0/1
ip nat inside
interface s0/1/0
ip nat outside
end
wr

 

 

!!!!!!!!!!!!!!!!!!!!!!!!
!HQ-Sw!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!
en
conf t
int vlan 60
ip add 172.16.15.10 255.255.255.248
no shut
ip default-gateway 172.16.15.9
vlan 15
name Servers
vlan 30
name PCs
vlan 45
name Native
vlan 60
name Management
interface range fa0/1 - 10
switchport mode access
switchport access vlan 30
interface fa0/1
switchport port-security
switchport port-security maximum 2
switchport port-security mac-address sticky
switchport port-security violation restrict
interface range fa0/11 - 20
switchport mode access
switchport access vlan 15
interface g0/1
switchport mode trunk
switchport trunk native vlan 45
interface range fa0/21 - 24 , g0/2
shutdown
ip domain-name cisco.com
crypto key gen rsa
1024
user HQadmin pass ciscoclass
service password-encryption
ip ssh version 2
ip ssh auth 2
ip ssh time 60
line vty 0 15
login local
transport input ssh

 

=======================================================

ISOMORPH ID = 11

=======================================================

 

!Admin!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
en
conf t
ip dhcp pool LAN
network 10.10.10.192 255.255.255.192
default-router 10.10.10.193
interface GigabitEthernet0/0
no shutdown
interface GigabitEthernet0/0.15
encapsulation dot1Q 15
ip address 10.10.10.161 255.255.255.224
ip nat inside
interface GigabitEthernet0/0.30
encapsulation dot1Q 30
ip address 10.10.10.193 255.255.255.192
ip nat inside
interface GigabitEthernet0/0.45
encapsulation dot1Q 45 native
ip address 10.10.10.129 255.255.255.240
interface GigabitEthernet0/0.60
encapsulation dot1Q 60
ip address 10.10.10.145 255.255.255.240
router rip
version 2
no auto-summary
network 10.0.0.0
!
interface s0/0/0
ip nat inside
interface s0/0/1
ip nat inside
interface s0/1/0
ip nat outside
!
ip nat pool TEST 198.133.219.128 198.133.219.129 netmask 255.255.255.252
ip nat inside source list 1 pool TEST overload
ip nat inside source static 10.10.10.162 198.133.219.130
ip route 0.0.0.0 0.0.0.0 Serial0/1/0
access-list 1 permit 10.0.0.0 0.255.255.255
end
wr

 

!!!!!!!!!!!!!!!!!!!!!!!!
!Admin-Sw!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
en
conf t
int vlan 60
ip add 10.10.10.146 255.255.255.240
no shut
ip default-gateway 10.10.10.145
vlan 15
name Servers
vlan 30
name PCs
vlan 45
name Native
vlan 60
name Management
interface range fa0/1 - 10
switchport mode access
switchport access vlan 30
interface fa0/1
switchport port-security
switchport port-security maximum 2
switchport port-security mac-address sticky
switchport port-security violation restrict
interface range fa0/11 - 20
switchport mode access
switchport access vlan 15
interface g0/1
switchport mode trunk
switchport trunk native vlan 45
interface range fa0/21 - 24 , g0/2
shutdown
ip domain-name cisco.com
crypto key gen rsa
1024
user Admin pass letmein
service password-encryption
ip ssh version 2
ip ssh auth 2
ip ssh time 60
line vty 0 15
login local
transport input ssh

 

===============================================================

ISOMORPH ID: 22

===============================================================

 

!Central!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
en
conf t
ip dhcp pool LAN
network 192.168.45.128 255.255.255.192
default-router 192.168.45.129
interface GigabitEthernet0/0
no shutdown
interface GigabitEthernet0/0.15
encapsulation dot1Q 15
ip address 192.168.45.65 255.255.255.192
ip nat inside
interface GigabitEthernet0/0.30
encapsulation dot1Q 30
ip address 192.168.45.129 255.255.255.192
ip nat inside
interface GigabitEthernet0/0.45
encapsulation dot1Q 45 native
ip address 192.168.45.17 255.255.255.240
interface GigabitEthernet0/0.60
encapsulation dot1Q 60
ip address 192.168.45.33 255.255.255.240
router rip
version 2
no auto-summary
network 192.168.45.0
!
interface s0/0/0
ip nat inside
interface s0/0/1
ip nat inside
interface s0/1/0
ip nat outside
!
ip nat pool TEST 64.100.32.56 64.100.32.57 netmask 255.255.255.252
ip nat inside source list 1 pool TEST overload
ip nat inside source static 192.168.45.66 64.100.32.58
ip route 0.0.0.0 0.0.0.0 Serial0/1/0
access-list 1 permit 192.168.45.0 0.0.0.255
end
wr

 

!!!!!!!!!!!!!!!!!!!!!!!!
!Cnt-Sw!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
en
conf t
int vlan 60
ip add 192.168.45.34 255.255.255.240
no shut
ip default-gateway 192.168.45.33
vlan 15
name Servers
vlan 30
name PCs
vlan 45
name Native
vlan 60
name Management
interface range fa0/1 - 10
switchport mode access
switchport access vlan 30
interface fa0/1
switchport port-security
switchport port-security maximum 2
switchport port-security mac-address sticky
switchport port-security violation restrict
interface range fa0/11 - 20
switchport mode access
switchport access vlan 15
interface g0/1
switchport mode trunk
switchport trunk native vlan 45
interface range fa0/21 - 24 , g0/2
shutdown
ip domain-name cisco.com
crypto key gen rsa
1024
user CAdmin pass itsasecret
service password-encryption
ip ssh version 2
ip ssh auth 2
ip ssh time 60
line vty 0 15
login local
transport input ssh

From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.

Version 5.02Version 5.03Version 6.0Online Assessment
Chapter 10 ExamChapter 10 ExamChapter 10 ExamOnline Test
Next Chapter
Practice FinalPractice FinalPractice FinalOnline Test
Lab Activities
10.1.1.4 Packet Tracer – Map a Network Using CDP
10.2.1.4 Packet Tracer – Configure and Verify NTP
10.2.3.5 Packet Tracer – Configuring Syslog and NTP
10.3.1.8 Packet Tracer – Backing Up Configuration Files
10.3.3.5 Packet Tracer – Using a TFTP Server to Upgrade a Cisco IOS Image
10.4.1.1 Packet Tracer – Skills Integration Challenge

Comments

comments