2.4.1.2 Packet Tracer – Skills Integration Challenge – ILM

2.4.1.2 Packet Tracer – Skills Integration Challenge – ILM

From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.

Version 5.02 Version 5.1 Version 6.0 Online Assessment
Chapter 2 Exam Chapter 2 Exam Chapter 2 Exam Online Test
Next Chapter
Chapter 3 Exam Chapter 3 Exam Chapter 3 Exam Online Test
Lab Activities
2.1.4.6 Packet Tracer – Navigating the IOS
2.2.3.4 Packet Tracer – Configuring Initial Switch Settings
2.3.2.5 Packet Tracer – Implementing Basic Connectivity
2.4.1.2 Packet Tracer – Skills Integration Challenge

Packet Tracer – Skills Integration Challenge (Answer Version)

Answer Note: Red font color or gray highlights indicate text that appears in the Answer copy only.

Addressing Table

Device Interface IP Address Subnet Mask
[[S1Name]] VLAN 1 [[S1Add]] 255.255.255.0
[[S2Name]] VLAN 1 [[S2Add]] 255.255.255.0
[[PC1Name]] NIC [[PC1Add]] 255.255.255.0
[[PC2Name]] NIC [[PC2Add]] 255.255.255.0

Objectives

  • Configure hostnames and IP addresses on two Cisco Internetwork Operating System (IOS) switches using the command-line interface (CLI).
  • Use Cisco IOS commands to specify or limit access to the device configurations.
  • Use IOS commands to save the running configuration.
  • Configure two host devices with IP addresses.
  • Verify connectivity between the two PC end devices.

Scenario

As a recently hired LAN technician, your network manager has asked you to demonstrate your ability to configure a small LAN. Your tasks include configuring initial settings on two switches using the Cisco IOS and configuring IP address parameters on host devices to provide end-to-end connectivity. You are to use two switches and two hosts/PCs on a cabled and powered network.

Requirements

  • Use a console connection to access each switch.
  • Name [[S1Name]] and [[S2Name]] switches.
  • Use the [[LinePW]] password for all lines.
  • Use the [[SecretPW]] secret password.
  • Encrypt all clear text passwords.
  • Include the word warning in the message-of-the-day (MOTD) Banner.
  • Configure addressing for all devices according to the Addressing Table.
  • Save your configurations.
  • Verify connectivity between all devices.

Note: Click Check Results to see your progress. Click Reset Activity to generate a new set of requirements. If you click on this before you complete the activity, all configurations will be lost.

Isomorph Index: [[indexNames]][[indexPWs]][[indexAdds]][[indexTopos]]

Answer Notes

The following information is for the Answer version only.

This activity uses variables that are randomly generated each time the activity is open or the “Reset Activity” button is clicked. Although the tables below show device names mapping to specific address schemes, the names and addresses are not bound together. For example, a student could get the device names shown in Scenario 1 with the addressing shown in Scenario 2. In addition, one of three versions of the topology will be presented to the student.

Scenario 1

Device Interface Address Subnet Mask
Class-A VLAN 1 128.107.20.10 255.255.255.0
Class-B VLAN1 128.107.20.15 255.255.255.0
Student-1 NIC 128.107.20.25 255.255.255.0
Student-2 NIC 128.107.20.30 255.255.255.0

Scenario 2

Device Interface Address Subnet Mask
Room-145 VLAN 1 172.16.5.35 255.255.255.0
Room-146 VLAN 1 172.16.5.40 255.255.255.0
Manager NIC 172.16.5.50 255.255.255.0
Reception NIC 172.16.5.60 255.255.255.0

Scenario 3

Device Interface Address Subnet Mask
ASw-1 VLAN 1 10.10.10.100 255.255.255.0
ASw-2 VLAN 1 10.10.10.150 255.255.255.0
User-01 NIC 10.10.10.4 255.255.255.0
User-02 NIC 10.10.10.5 255.255.255.0

Topology Isomorphs

From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.

Version 5.02 Version 5.1 Version 6.0 Online Assessment
Chapter 2 Exam Chapter 2 Exam Chapter 2 Exam Online Test
Next Chapter
Chapter 3 Exam Chapter 3 Exam Chapter 3 Exam Online Test
Lab Activities
2.1.4.6 Packet Tracer – Navigating the IOS
2.2.3.4 Packet Tracer – Configuring Initial Switch Settings
2.3.2.5 Packet Tracer – Implementing Basic Connectivity
2.4.1.2 Packet Tracer – Skills Integration Challenge

 

Comments

comments