Which task has to be performed on Router 1 for it to establish an OSPF adjacency with Router 2?

Open the PT Activity. Perform the tasks in the activity instructions and then answer the question. Which task has to be performed on Router 1 for it to establish an OSPF adjacency with Router 2? Issue the clear ip ospf process command. Remove the passive interface command from interface FastEthernet 0/0. Add the network 10.0.1.0 […]
Continue reading…

 

What is the reason for a network engineer to alter the default reference bandwidth parameter when configuring OSPF?

What is the reason for a network engineer to alter the default reference bandwidth parameter when configuring OSPF? to more accurately reflect the cost of links greater than 100 Mb/s to increase the speed of the link to force that specific link to be used in the destination route to enable the link for OSPF […]
Continue reading…

 

In an OSPFv2 configuration, what is the effect of entering the command network 192.168.1.1 0.0.0.0 area 0 ?

In an OSPFv2 configuration, what is the effect of entering the command network 192.168.1.1 0.0.0.0 area 0 ? It changes the router ID of the router to 192.168.1.1. It enables OSPF on all interfaces on the router. It tells the router which interface to turn on for the OSPF routing process. It allows all 192.168.1.0 […]
Continue reading…

 

After modifying the router ID on an OSPF router, what is the preferred method to make the new router ID effective?

After modifying the router ID on an OSPF router, what is the preferred method to make the new router ID effective? HQ# copy running-config startup-config HQ# clear ip ospf process HQ# clear ip route * HQ# resume Answers Explanation & Hints: To modify a router-id on an OSPF-enabled router, it is necessary to reset the […]
Continue reading…

 

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 128.107.0.0 255.255.255.192. What wildcard mask would the administrator use in the OSPF network statement?

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 128.107.0.0 255.255.255.192. What wildcard mask would the administrator use in the OSPF network statement? 0.0.0.63 0.0.0.15 0.0.0.31 0.0.0.7 For more question and answers: Click Here CCNA3 v7 – ENSA – Modules 1 – 2: OSPF Concepts and […]
Continue reading…

 

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 128.107.0.0 255.255.255.192. What wildcard mask would the administrator use in the OSPF network statement?

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 128.107.0.0 255.255.255.192. What wildcard mask would the administrator use in the OSPF network statement? 0.0.0.63 0.0.0.3 0.0.0.7 0.0.63.255 For more question and answers: Click Here CCNA3 v7 – ENSA – Modules 1 – 2: OSPF Concepts and […]
Continue reading…

 

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 64.100.0.0 255.255.255.0. What wildcard mask would the administrator use in the OSPF network statement?

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 64.100.0.0 255.255.255.0. What wildcard mask would the administrator use in the OSPF network statement? 0.0.0.255 0.0.0.127 0.0.0.63 0.0.0.31 For more question and answers: Click Here CCNA3 v7 – ENSA – Modules 1 – 2: OSPF Concepts and […]
Continue reading…

 

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 198.19.0.0 255.255.252.0. What wildcard mask would the administrator use in the OSPF network statement?

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 198.19.0.0 255.255.252.0. What wildcard mask would the administrator use in the OSPF network statement? 0.0.3.255 0.0.31.255 0.0.63.255 0.0.0.255 For more question and answers: Click Here CCNA3 v7 – ENSA – Modules 1 – 2: OSPF Concepts and […]
Continue reading…

 

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 198.19.0.0 255.255.252.0. What wildcard mask would the administrator use in the OSPF network statement?

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 198.19.0.0 255.255.252.0. What wildcard mask would the administrator use in the OSPF network statement? 0.0.3.255 0.0.31.255 0.0.63.255 0.0.15.255 For more question and answers: Click Here CCNA3 v7 – ENSA – Modules 1 – 2: OSPF Concepts and […]
Continue reading…

 

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 192.168.181.0 255.255.254.0. What wildcard mask would the administrator use in the OSPF network statement?

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 192.168.181.0 255.255.254.0. What wildcard mask would the administrator use in the OSPF network statement? 0.0.1.255 0.0.31.255 0.0.63.255 0.0.15.255 For more question and answers: Click Here CCNA3 v7 – ENSA – Modules 1 – 2: OSPF Concepts and […]
Continue reading…

 

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 192.168.223.0 255.255.254.0. What wildcard mask would the administrator use in the OSPF network statement?

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 192.168.223.0 255.255.254.0. What wildcard mask would the administrator use in the OSPF network statement? 0.0.1.255 0.0.7.255 0.0.15.255 0.0.31.255 For more question and answers: Click Here CCNA3 v7 – ENSA – Modules 1 – 2: OSPF Concepts and […]
Continue reading…

 

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 128.107.0.0 255.255.252.0. What wildcard mask would the administrator use in the OSPF network statement?

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 128.107.0.0 255.255.252.0. What wildcard mask would the administrator use in the OSPF network statement? 0.0.3.255 0.0.0.3 0.0.0.7 0.0.63.255 For more question and answers: Click Here CCNA3 v7 – ENSA – Modules 1 – 2: OSPF Concepts and […]
Continue reading…

 

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 64.102.0.0 255.255.255.128. What wildcard mask would the administrator use in the OSPF network statement?

An administrator is configuring single-area OSPF on a router. One of the networks that must be advertised is 64.102.0.0 255.255.255.128. What wildcard mask would the administrator use in the OSPF network statement? 0.0.0.127 0.0.0.63 0.0.63.255 0.0.31.255 For more question and answers: Click Here CCNA3 v7 – ENSA – Modules 1 – 2: OSPF Concepts and […]
Continue reading…