8.3.1.4 Packet Tracer – Implementing a Subnetted IPv6 Addressing Scheme

8.3.1.4 Packet Tracer – Implementing a Subnetted IPv6 Addressing Scheme

From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.

Version 5.02 Version 5.1 Version 6.0 Online Assessment
Chapter 8 Exam Chapter 8 Exam Chapter 8 Exam Online Test
Next Chapter
Chapter 9 Exam Chapter 9 Exam Chapter 9 Exam Online Test
Lab Activities
8.1.4.7 Packet Tracer – Subnetting Scenario 1
8.1.4.7 Packet Tracer – Subnetting Scenario
8.2.1.4 Packet Tracer – Designing and Implementing a VLSM Addressing Scheme
8.3.1.4 Packet Tracer – Implementing a Subnetted IPv6 Addressing Scheme
8.4.1.2 Packet Tracer – Skills Integration Challenge

Packet Tracer – Implementing a Subnetted IPv6 Addressing Scheme (Answer Version – Optional Packet Tracer)

Answer Note: Red font color or Gray highlights indicate text that appears in the Answer copy only. Optional activities are designed to enhance understanding and/or to provide additional practice.

Topology

8.3.1.4 Packet Tracer – Implementing a Subnetted IPv6 Addressing Scheme

8.3.1.4 Packet Tracer – Implementing a Subnetted IPv6 Addressing Scheme

Addressing Table

Device Interface IPv6 Address Link-Local
R1 G0/0 2001:DB8:ACAD:00C8::1/64 FE80::1
G0/1 2001:DB8:ACAD:00C9::1/64 FE80::1
S0/0/0 2001:DB8:ACAD:00CC::1/64 FE80::1
R2 G0/0 2001:DB8:ACAD:00CA::1/64 FE80::2
G0/1 2001:DB8:ACAD:00CB::1/64 FE80::2
S0/0/0 2001:DB8:ACAD:00CC::2/64 FE80::2
PC1 NIC Auto Config
PC2 NIC Auto Config
PC3 NIC Auto Config
PC4 NIC Auto Config

Objectives

Part 1: Determine the IPv6 Subnets and Addressing Scheme

Part 2: Configure the IPv6 Addressing on Routers and PCs and Verify Connectivity

Scenario

Your network administrator wants you to assign five /64 IPv6 subnets to the network shown in the topology. Your job is to determine the IPv6 subnets, assign IPv6 addresses to the routers, and set the PCs to automatically receive IPv6 addressing. Your final step is to verify connectivity between IPv6 hosts.

Part 1: Determine the IPv6 Subnets and Addressing Scheme

Step 1: Determine the number of subnets needed.

Start with the IPv6 subnet 2001:DB8:ACAD:00C8::/64 and assign it to the R1 LAN attached to GigabitEthernet 0/0, as shown in the Subnet Table. For the rest of the IPv6 subnets, increment the 2001:DB8:ACAD:00C8::/64 subnet address by 1 and complete the Subnet Table with the IPv6 subnet addresses.

Subnet Table

Subnet Description Subnet Address
R1 G0/0 LAN 2001:DB8:ACAD:00C8::0/64
R1 G0/1 LAN 2001:DB8:ACAD:00C9::0/64
R2 G0/0 LAN 2001:DB8:ACAD:00CA::0/64
R2 G0/1 LAN 2001:DB8:ACAD:00CB::0/64
WAN Link 2001:DB8:ACAD:00CC::0/64

Step 2: Assign IPv6 addressing to the routers.

  1. Assign the first IPv6 addresses to R1 for the two LAN links and the WAN link.
  2. Assign the first IPv6 addresses to R2 for the two LANs. Assign the second IPv6 address for the WAN link.
  3. Document the IPv6 addressing scheme in the Addressing Table.

Part 2: Configure the IPv6 Addressing on Routers and PCs and Verify Connectivity

Step 1: Configure the routers with IPv6 addressing.

Note: This network is already configured with some IPv6 commands that are covered in a later course. At this point in your studies, you only need to know how to configure IPv6 address on an interface.

Configure R1 and R2 with the IPv6 addresses you specified in the Addressing Table and activate the interfaces.

Router(config-if)# ipv6 address ipv6-address/prefix

Router(config-if)# ipv6 address ipv6-link-local link-local

Step 2: Configure the PCs to automatically receive IPv6 addressing.

Configure the four PCs for autoconfiguration. Each should then automatically receive full IPv6 addresses from the routers.

Step 3: Verify connectivity between the PCs.

Each PC should be able to ping the other PCs and the routers.

From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.

Version 5.02 Version 5.1 Version 6.0 Online Assessment
Chapter 8 Exam Chapter 8 Exam Chapter 8 Exam Online Test
Next Chapter
Chapter 9 Exam Chapter 9 Exam Chapter 9 Exam Online Test
Lab Activities
8.1.4.7 Packet Tracer – Subnetting Scenario 1
8.1.4.7 Packet Tracer – Subnetting Scenario
8.2.1.4 Packet Tracer – Designing and Implementing a VLSM Addressing Scheme
8.3.1.4 Packet Tracer – Implementing a Subnetted IPv6 Addressing Scheme
8.4.1.2 Packet Tracer – Skills Integration Challenge

Suggested Scoring Rubric

Activity Section Question Location Possible Points Earned Points
Part 1: Determine IPv6 Subnets and Addressing Scheme Subnet Table 30
Addressing Table 30
Part 1 Total 60
Packet Tracer Score 40
Total Score 100

Comments

comments