CCNA Security Chapter 6 Exam v2

Last Updated on by

Implementing Network Security ( Version 2.0) – CCNAS Chapter 6 Exam Answers 2019 Full 100%

  1. Refer to the exhibit. The Fa0/2 interface on switch S1 has been configured with the switchport port-security mac-address 0023.189d.6456 command and a workstation has been connected. What could be the reason that the Fa0/2 interface is shutdown?

    Implementing Network Security ( Version 2.0) – CCNAS Chapter 6 Exam Answers 2019 01

    Implementing Network Security ( Version 2.0) – CCNAS Chapter 6 Exam Answers 2019 01

    • The connection between S1 and PC1 is via a crossover cable.
    • The Fa0/24 interface of S1 is configured with the same MAC address as the Fa0/2 interface.
    • S1 has been configured with a switchport port-security aging command.
    • The MAC address of PC1 that connects to the Fa0/2 interface is not the configured MAC address.
      Explanation:

      The security violation counter for Fa0/2 has been incremented (evidenced by the 1 in the SecurityViolation column). The most secure addresses allowed on port Fa0/2 is 1 and that address was manually entered. Therefore, PC1 must have a different MAC address than the one configured for port Fa0/2. Connections between end devices and the switch, as well as connections between a router and a switch, are made with a straight-through cable.

  2. Two devices that are connected to the same switch need to be totally isolated from one another. Which Cisco switch security feature will provide this isolation?

    • BPDU guard
    • DTP
    • PVLAN Edge
    • SPAN
      Explanation:

      The PVLAN Edge feature does not allow one device to see traffic that is generated by another device. Ports configured with the PVLAN Edge feature are also known as protected ports. BPDU guard prevents unauthorized connectivity to a wired Layer 2 switch. SPAN is port mirroring to capture data from one port or VLAN and send that data to another port. DTP (Dynamic Trunking Protocol) is automatically enabled on some switch models to create a trunk if the attached device is configured for trunking. Cisco recommends disabling DTP as a best practice.

  3. Which two functions are provided by Network Admission Control? (Choose two.)

    • protecting a switch from MAC address table overflow attacks
    • ensuring that only authenticated hosts can access the network
    • stopping excessive broadcasts from disrupting network traffic
    • enforcing network security policy for hosts that connect to the network
    • limiting the number of MAC addresses that can be learned on a single switch port
      Explanation:

      The port security feature can be used to limit how many MAC addresses can be learned on a switch port and help prevent MAC address table overflow attacks. Storm control is a feature that can prevent excessive broadcasts and multicasts from disrupting other LAN traffic. These functions are not provided by Network Admission Control (NAC).

  4. Which spanning-tree enhancement prevents the spanning-tree topology from changing by blocking a port that receives a superior BPDU?

    • BDPU filter
    • BPDU guard
    • root guard
    • PortFast
      Explanation:

      Root guard prevents the placement of the root bridge from changing by blocking any port that receives a superior BPDU. A superior BPDU is one with a higher root bridge ID than the currently selected root bridge has.

  5. Which security feature should be enabled in order to prevent an attacker from overflowing the MAC address table of a switch?

    • BPDU filter
    • port security
    • storm control
    • root guard
      Explanation:

      Port security limits the number of source MAC addresses allowed through a switch port. This feature can prevent an attacker from flooding a switch with many spoofed MAC addresses.

  6. In what situation would a network administrator most likely implement root guard?

    • on all switch ports (used or unused)
    • on all switch ports that connect to host devices
    • on all switch ports that connect to another switch
    • on all switch ports that connect to a Layer 3 device
    • on all switch ports that connect to another switch that is not the root bridge
      Explanation:

      Root guard in conjunction with PortFast, and BPDU guard is used to prevent an STP manipulation attack.

  7. What component of Cisco NAC is responsible for performing deep inspection of device security profiles?

    • Cisco NAC Agent
    • Cisco NAC Server
    • Cisco NAC Profiler
    • Cisco NAC Manager
      Explanation:

      The Cisco NAC Agent is a lightweight agent that runs on endpoint devices. The function of this agent is to perform deep inspection of the security profile of the endpoints. This includes inspecting the registry settings, services, and files.

  8. What is the role of the Cisco NAC Manager in implementing a secure networking infrastructure?

    • to perform deep inspection of device security profiles
    • to provide post-connection monitoring of all endpoint devices
    • to define role-based user access and endpoint security policies
    • to assess and enforce security policy compliance in the NAC environment
      Explanation:

      Cisco NAC authenticates users and assess the policy compliance of the device the user is using to connect to the network. The role of the Cisco NAC Manager is to define the security policies of user access and endpoint security policies.

  9. What is the role of the Cisco NAC Server within the Cisco Secure Borderless Network Architecture?

    • providing the ability for company employees to create guest accounts
    • assessing and enforcing security policy compliance in the NAC environment
    • defining role-based user access and endpoint security policies
    • providing post-connection monitoring of all endpoint devices
      Explanation:

      Cisco NAC is used in the Cisco Borderless Network Architecture to authenticate users and ensure user devices are compliant with security policies. The Cisco NAC server assesses and enforces security policy compliance.

  10. What is the role of the Cisco NAC Guest Server within the Cisco Borderless Network architecture?

    • It provides post-connection monitoring of all endpoint devices.
    • It performs deep inspection of device security profiles.
    • It defines role-based user access and endpoint security policies.
    • It provides the ability for creation and reporting of guest accounts.
      Explanation:

      Cisco NAC is used in the Cisco Borderless Network Architecture to authenticate users and ensure that user devices are compliant with security policies. The Cisco NAC Guest Server manages guest network access and the ability to create guest accounts.

  11. Which three functions are provided under Cisco NAC framework solution? (Choose three.)

    • AAA services
    • VPN connection
    • intrusion prevention
    • secure connection to servers
    • scanning for policy compliance
    • remediation for noncompliant devices
      Explanation:

      The goal of both the Cisco NAC framework and the Cisco NAC Appliance is to ensure that only hosts that are authenticated and have their security posture examined and approved are permitted onto the network. They provide four important functions: authentication, authorization, and accounting; posture assessment (evaluating an incoming device against the security policies), quarantining of non-compliant systems, and remediation of noncompliant devices. They do not provide VPN connection or intrusion detection/prevention services.

  12. Which feature is part of the Antimalware Protection security solution?​

    • spam blocking
    • data loss prevention
    • file retrospection
    • user authentication and authorization
      Explanation:

      The Antimalware Protection (AMP) security solution can enable malware detection and blocking, continuous analysis, and retrospective alerting with the following:​File reputation – analysis of files inline and blocking or applying policies
      File sandboxing – analysis of unknown files to understand true file behavior
      File retrospection – continuing to analyze files for changing threat levels

  13. What security countermeasure is effective for preventing CAM table overflow attacks?

    • port security
    • DHCP snooping
    • IP source guard
    • Dynamic ARP Inspection
      Explanation:

      Port security is the most effective method for preventing CAM table overflow attacks. Port security gives an administrator the ability to manually specify what MAC addresses should be seen on given switch ports. It provides a method for limiting the number of MAC addresses that can be dynamically learned over a switch port.

  14. What is the behavior of a switch as a result of a successful CAM table attack?

    • The switch will forward all received frames to all other ports.
    • The switch will shut down.
    • The switch will drop all received frames.
    • The switch interfaces will transition to the error-disabled state.
      Explanation:

      As a result of a CAM table attack, a switch can run out of memory resources to store MAC addresses. When this happens, no new MAC addresses can be added to the CAM table and the switch will forward all received frames to all other ports. This would allow an attacker to capture all traffic that is flooded by the switch.

  15. What additional security measure must be enabled along with IP Source Guard to protect against address spoofing?

    • DHCP snooping
    • BPDU Guard
    • root guard
    • port security
      Explanation:

      Like Dynamic ARP Inspection (DAI), IP Source Guard (IPSG) needs to determine the validity of MAC-address-to-IP-address bindings. To do this IPSG uses the bindings database built by DHCP snooping.

  16. What are three techniques for mitigating VLAN hopping attacks? (Choose three.)

    • Disable DTP.
    • Enable trunking manually.
    • Set the native VLAN to an unused VLAN.
    • Enable BPDU guard.
    • Enable Source Guard.
    • Use private VLANs.
      Explanation:

      Mitigating a VLAN hopping attack can be done by disabling Dynamic Trunking Protocol (DTP), manually setting ports to trunking mode, and by setting the native VLAN of trunk links to VLANs not in use.

  17. What two mechanisms are used by Dynamic ARP inspection to validate ARP packets for IP addresses that are dynamically assigned or IP addresses that are static? (Choose two.)

    • MAC-address-to-IP-address bindings
    • ARP ACLs
    • Source Guard
    • IP ACLs
    • RARP
      Explanation:

      Two methods can be used by Dynamic ARP Inspection (DAI) to determine the validity of MAC-address-to-IP-address bindings. One is a bindings database built by DHCP snooping. The other method is through the use of user-configured ARP ACLs.

  18. What protocol should be disabled to help mitigate VLAN hopping attacks?

    • DTP
    • STP
    • CDP
    • ARP
      Explanation:

      Mitigating a VLAN hopping attack can be done by disabling Dynamic Trunking Protocol (DTP) and by setting the native VLAN of trunk links to a VLAN not in use.

  19. What network attack seeks to create a DoS for clients by preventing them from being able to obtain a DHCP lease?

    • DHCP starvation
    • DHCP spoofing
    • IP address spoofing
    • CAM table attack
      Explanation:

      DCHP starvation attacks are launched by an attacker with the intent to create a DoS for DHCP clients. To accomplish this goal, the attacker uses a tool that sends many DHCPDISCOVER messages in order to lease the entire pool of available IP addresses, thus denying them to legitimate hosts.

  20. What is the only type of port that an isolated port can forward traffic to on a private VLAN?

    • a promiscuous port
    • another isolated port
    • any access port in the same PVLAN
    • a community port
      Explanation:

      PVLANs are used to provide Layer 2 isolation between ports within the same broadcast domain. The level of isolation can be specified
      with three types of PVLAN ports:Promiscuous ports that can forward traffic to all other ports
      Isolated ports that can only forward traffic to promiscuous ports
      Community ports that can forward traffic to other community ports and promiscuous ports

  21. Which STP stability mechanism is used to prevent a rogue switch from becoming the root switch?

    • root guard
    • loop guard
    • BPDU guard
    • Source Guard
      Explanation:

      There are several recommended STP stability mechanisms to help mitigate STP manipulation attacks:

      • PortFast – Used to immediately bring an interface configured as an access or trunk port to the forwarding state from a blocking state. This is applied to all end-user ports.
      • BPDU guard – Immediately error-disables a port that receives a BPDU. This is applied to all end-user ports.
      • Root guard – Prevents a switch from becoming the root switch. Applied to all ports where root switch should not be located.
      • Loop guard – Detects unidirectional links to prevent alternate or root ports from becoming designated ports. Applied to all ports that are or can become non-designated.
  22. How can a user connect to the Cisco Cloud Web Security service directly?

    • by establishing a VPN connection with the Cisco CWS
    • by using a proxy autoconfiguration file in the end device
    • by accessing a Cisco CWS server before visiting the destination web site
    • through the connector that is integrated into any Layer 2 Cisco switch
      Explanation:

      A client can connect to the Cisco CWS service directly by using a proxy autoconfiguration (PAC) file installed on the end device. The Cisco CWS connector is a software component integrated into four Cisco products including Cisco ASA, Cisco WSA, and Cisco AnyConnect Secure Mobility Client. A client can use the Cisco CWS service through these products.

  23. What security benefit is gained from enabling BPDU guard on PortFast enabled interfaces?

    • preventing rogue switches from being added to the network
    • protecting against Layer 2 loops
    • enforcing the placement of root bridges
    • preventing buffer overflow attacks
      Explanation:

      BPDU guard immediately error-disables a port that receives a BPDU. This prevents rogue switches from being added to the network. BPDU guard should only be applied to all end-user ports.

  24. Which mitigation technique would prevent rogue servers from providing false IP configuration parameters to clients?

    • disabling CDP on edge ports
    • implementing port-security on edge ports
    • turning on DHCP snooping
    • implementing port security
      Explanation:

      When DHCP snooping is enabled, a switch will deny packets containing unauthorized DHCP server messages coming from an untrusted port.