IT Essentials – ITE Chapter 4 Exam Answers v6.0 2018 2019

IT Essentials – ITE Chapter 4 Exam Answers v6.0 2018 2019

Cisco ITE v6.0 latest or IT Essentials v6.0 Chapter 4 Exam Answers PC hardware and software (ITE Version 6.00) collection year 2017, 2018 and 2019 Full 100%. IT Essentials has been know as ITE v6. The following are the questions exam answers. Guarantee Passed. ITE v6.0 Chapter 4 exam answers has some new update from the old version 5. You can review all Chapter 4 Exam Answers. You will get passed scored 100% with this version 6.0. Good Luck for ITE v6.0 Exam!

CCNA7.COM is helping you to collect Cisco IT Essentials Chapter 4 Exam Answers v6 2018 & 2019 or ITE Chapter 4 Exam to show you on this page. ITE Chapter 4 Exam are almost 26 questions. While you take exam online with Cisco, you will meet 26 questions with duration 1 hours to 2 hours depend on your instructor activate. To pass ITE v6 Chapter 4 Exam, you should review all these question. We provide you accurate answer 100%.

From year to year, ITE Essentials has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.
Version 5.0 Version 6.0 Online Assessment
Chapter 4 Chapter 4 Online
Next Chapter
Chapter 5 Chapter 5 Online
Lab Activities
  1. Which negative environmental factor does cleaning the inside of a computer reduce?

    • dust
    • EMI
    • rust
    • ESD
      Explanation:

      Accumulated dust inside the computer can prevent the flow of air and can hinder cooling.

  2. Which component can be easily damaged by the direct spray of compressed air when cleaning the inside the computer case?

    • fan
    • heat sink
    • power supply
    • CPU
    • cable connectors
      Explanation:

      When you clean the inside of the computer, hold the fan blades in place. This prevents over-spinning the rotor or moving the fan in the wrong direction.

  3. On the production floor, a furniture plant has laptops for process monitoring and reporting. The production floor environment is around 80 degrees Fahrenheit (27 degrees Celsius). The humidity level is fairly high around 70 percent. Fans are mounted in the ceiling for air circulation. Wood dust is prevalent. Which condition is most likely to adversely affect a laptop that is used in this environment?

    • the temperature
    • the humidity
    • the air flow
    • the dust
      Explanation:

      Most laptops are created to be tolerant of a wide range of humidity levels and room temperatures. Dust, however, can cause overheating and failures.

  4. A vegetable canning plant uses laptops for monitoring of assembly lines. The production environment has an ambient temperature around 75 degrees Fahrenheit (24 degrees Celsius). The humidity level is around 30 percent. Noise levels are high due to the canning machinery. The laptops are in a wooden box that tightly surrounds the laptop on three sides. Which factor is most likely to adversely affect a laptop that is used in this environment?

    • the room temperature
    • the humidity
    • the noise
    • the laptop container
      Explanation:

      The temperature and humidity levels are within normal expectations for laptops. Noise isn’t a factor. The wooden box environment would prevent proper air flow.

  5. A scientific expedition team is using laptops for their work. The temperatures where the scientists are working range from -13 degrees Fahrenheit (-25 degree Celsius) to 80 degrees Fahrenheit (27 degrees Celsius). The humidity level is around 40 percent. Noise levels are low, but the terrain is rough and winds can reach 45 miles per hour (72 kilometers per hour). When needed, the scientists stop walking and enter the data using the laptop. Which condition is most likely to adversely affect a laptop that is used in this environment?

    • the temperature
    • the humidity
    • the rough terrain
    • the wind
      Explanation:

      Even though laptops are normally manufactured to operate within a wide range of temperatures, the lower temperature is below freezing and not an optimal environment.

  6. What is part of creating a preventive maintenance plan?

    • documenting the details and frequency of each maintenance task
    • performing hardware upgrades
    • discarding all replaced parts
    • performing a forensic audit of security breaches
      Explanation:

      Documenting the frequency of tasks allows for a systematic check of the hardware and software to ensure proper operation.

  7. A technician is performing hardware maintenance of PCs at a construction site. What task should the technician perform as part of a preventive maintenance plan?

    • Remove dust from intake fans.
    • Back up the data, reformat the hard drive, and reinstall the data.
    • Develop and install forensic tracking software.
    • Perform an audit of all software that is installed.
      Explanation:

      Construction sites are normally very dusty environments. The accumulation of dust in a PC can lead to failure of various components. There is a high risk of overheating due to cooling fans failing because of excessive dust buildup. The technician should ensure that all dust is removed from the intake fans as part of the maintenance process.

  8. Which task should be part of a hardware maintenance routine?

    • Review security updates.
    • Update virus definition files.
    • Adjust the monitor for optimum resolution.
    • Remove dust from inside the hard drive.
    • Check for and secure any loose cables.
      Explanation:

      Hardware maintenance tasks include these procedures:
      • Remove dust from fan intakes;
      • Remove dust from power supply;
      • Remove dust from components found inside the computer;
      • Clean mouse and keyboard;
      • Check for and secure any loose cables.
      Maintenance tasks like defragmenting a disk or scanning a hard drive for errors are part of a software maintenance routine.

  9. During the process of testing a theory of several probable causes to a problem, which should be tested first?

    • the easiest and most obvious
    • those the customer believes to be the most important
    • the most complex and difficult to diagnose
    • those chosen by random selection
      Explanation:

      Even though the customer may think that there is a major problem, start with the obvious issues before moving to more complex diagnoses.

  10. Which two items could be used to help establish a plan of action when resolving a computer problem? (Choose two.)

    • a multimeter
    • a loopback plug
    • the computer manual
    • the computer repair history log
    • BIOS diagnostics
      Explanation:

      During the six steps of troubleshooting, once the cause of the problem is determined, the “establish a plan of action to resolve the problem and implement the solution” step is where a technician has to do more research by searching the Internet, talking to another technician, reviewing the history logs, manuals, forums, etc.

  11. Which two types of data should be backed up before troubleshooting a computer for a customer? (Choose two.)

    • BIOS system file
    • driver files for the hard disk
    • Internet Explorer favorites files
    • Windows operating system files
    • documents that are created by the customer
      Explanation:

      Only customer created data is necessary for backup as a precaution to the troubleshooting process.

  12. A customer reports that recently several files cannot be accessed. The service technician decides to check the hard disk status and the file system structure. The technician asks the customer if a backup has been performed on the disk and the customer replies that the backup was done a week ago to a different logical partition on the disk. What should the technician do before performing diagnostic procedures on the disk?

    • Run the CHKDSK utility.
    • Back up the user data to a removable drive.
    • Perform file restore from the existing backup copy at the logical partition.
    • Install a new hard disk as the primary disk, then make the current disk a slave.
      Explanation:

      Always perform a backup before beginning any troubleshooting. Even though the data was backed up to a different partition, the data is still on the same hard drive. If the drive crashes, the data might not be recoverable.

  13. What is the next step after a possible solution is implemented during a troubleshooting process?

    • Test another possible solution.
    • Identify other possible causes for the problem.
    • Document the cause and the solution for the problem.
    • Verify the full system functionality and apply maintenance procedures.
      Explanation:

      After the repairs have been completed, continue the troubleshooting process by verifying full system functionality and implementing any needed preventive measures.

  14. An employee reports that the antivirus software cannot obtain updates. The support technician notices that the license for the software has expired. The technician adds a new license to the software and completes the update service. What should the technician do next?

    • Record the new license number in the log.
    • Download advanced antivirus software from another vendor.
    • Run a full virus scan on the computer.
    • Review the Event Viewer for the date and time that the last software update was performed.
      Explanation:

      After the repairs have been completed, continue the troubleshooting process by verifying full system functionality and implementing any needed preventive measures.

  15. What task should be completed before escalating a problem to a higher-level technician?

    • Document each test that was tried.
    • Ask the customer to open a new support request.
    • Redo each test to ensure the accuracy of the results.
    • Replace all hardware components with components that are known to work.
      Explanation:

      Before escalating a ticket, document each test that has been performed. Information about the tests is vital if the problem needs to be escalated to another technician.

  16. Which step of the six-step troubleshooting process is where a technician would ask the computer user to print a document on a newly installed printer?

    • Test the theory to determine the cause.
    • Identify the problem.
    • Establish a theory of probable cause.
    • Document findings, actions, and outcomes.
    • Establish a plan of action to resolve the problem and implement the solution.
    • Verify full system functionality and, if applicable, implement preventive measures.
      Explanation:

      After the problem has been resolved, a technician should always verify full system functionality to ensure that the solution worked properly. This usually involves having the user test the original problem to ensure that it is fixed and that no new problems have been introduced.

  17. After a technician tests a theory of probable causes, what two actions should the technician take if the testing did not identify an exact cause? (Choose two.)

    • Establish a new theory of probable causes.
    • Randomly replace components one at a time until the problem is solved.
    • Document each test tried that did not correct the problem.
    • Verify full system functionality.
    • Test all remaining possible causes starting with the most complex.
      Explanation:

      If the exact cause of the problem has not been determined after you have tested all your theories, establish a new theory of probable causes and test it.

  18. What is the preferred method to remove a disc from an optical drive that fails to eject the disc?

    • Insert a pin into the small hole on the front of the drive.
    • Use a small screwdriver and pry the drive door open.
    • Remove the top of the drive enclosure.
    • Send the drive to an authorized repair depot.
      Explanation:

      If a computer will not eject the optical disc, to open the tray you can insert a pin in the small hole next to the eject button on the drive.

  19. A technician is called to an office where the computer is randomly rebooting. Which of the given components would most likely cause this issue?

    • BIOS
    • CMOS battery
    • optical drive
    • power supply
      Explanation:

      A failing power supply could cause a computer to reboot or to emit a smell of burning electronics.

  20. What would happen if a PC that contains a power supply that does not automatically adjust for input voltage is set to 230 volts and attaches to an outlet in the United States?

    • The power supply would explode.
    • The PC would not turn on.
    • The PC would display an error code.
    • The PC would emit a series of beeps.
      Explanation:

      In the United States, the wall outlet electrical power is standardized at 120 volts AC.

  21. During the troubleshooting of a PC that will not boot, it is suspected that the problem is with the RAM modules. The RAM modules are removed and put into another PC, which successfully powers on. The RAM modules are then put back into the original PC and it now successfully powers on as well. What was the most likely cause of the problem?

    • The RAM modules have bad blocks.
    • The RAM modules were not seated firmly.
    • The RAM modules did not match the PC specs.
    • The RAM modules were inserted backwards into the DIMM slots.
      Explanation:

      If RAM is not seated firmly in the motherboard DIMM slots, it will not function properly. RAM cannot be inserted backwards into a DIMM slot because both the RAM chip and the slot are keyed so they only fit one way.

  22. After a new PCIe video card is added, the computer seems to boot successfully but it will not display any video. The computer was working properly before the new video card was installed. What is the most likely cause of the problem?

    • The monitor cable is faulty.
    • The new video card is not compatible with the CPU in the PC.
    • The saved CMOS settings are set to use the built-in video adapter.
    • The PC does not have enough RAM to support the new video card.
      Explanation:

      If you connect a monitor to a video card while the integrated video adapter is still active in the saved settings in CMOS, the card may not output any video. Disable the integrated video adapter in the BIOS Setup before using the new video card.

  23. A user has opened a ticket that indicates that the computer clock keeps losing the correct time. What is the most likely cause of the problem?

    • The motherboard clocking crystal is damaged.
    • The operating system needs to be patched.
    • The CMOS battery is loose or failing.
    • The CPU needs to be overclocked.
      Explanation:

      The CMOS battery holds the saved system BIOS settings, including the correct date and time. If the CMOS battery is dead or not connected properly, those settings can be lost.

  24. An employee reports that each time a workstation is started it locks up after about 5 minutes of use. What is the most likely cause of the problem?

    • The hard disk is failing.
    • The RAM is malfunctioning.
    • The CPU is overheating.
    • The power supply fails to provide adequate voltage and current.
      Explanation:

      Processor problems are often caused by faulty installations, incorrect CMOS setup, inadequate cooling and ventilation, and BIOS compatibility issues.

  25. A user reports that images on a computer display are distorted. The technician sends an intern to look at the problem. What could the technician tell the intern to check first that does not involve hardware replacement or disassembly?

    • LCD backlight adjustment
    • display settings
    • work desk stability
    • electrical interference
      Explanation:

      Ask the user if any of the display settings have been changed or verify settings such as the resolution.

  26. A user has connected an external monitor to a laptop VGA port. What is the next step the user should take?

    • Disable the current display being used by the laptop.
    • Access the BIOS and enable the VGA port on the laptop.
    • Reboot the system so that the currently connected external display can be recognized by the laptop.
    • Use a Fn key along with a multi-purpose key to send video to the external display.
      Explanation:

      In order to send a video signal to an external display, it is common for a user to press the Fn key along with a multi-purpose key.

From year to year, ITE Essentials has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.
Version 5.0 Version 6.0 Online Assessment
Chapter 4 Chapter 4 Online
Next Chapter
Chapter 5 Chapter 5 Online
Lab Activities